Termékek egyéb gyógyszerek (65)

MECHANICAL/HYDRAULIC FM LIFTERS FOR FURNITURE Ideal for transporting furniture, safes, containers and machine tools. The FM series mechanical/hydraulic lifter kit for furniture is suitable for moving furniture components in furniture stores, during removals or simply when you need to move furniture safely and without any effort. The maximum load capacity of the pair is 600kg (FM60 mechanical model) and 1800kg (FM180/A - FM 180/B hydraulic models). The kit consists of 2 lifts with lifting plates with non-slip coating and a strap for fixing. Lifting is by means of a screw with crank for the FM 60 model and a practical lever with a hydraulic pump for FM 180. The lifts are equipped with non-marking pivoting rubber wheels with steering lever. RAL 1028 yellow paint for the FM 180 models and blue for the FM 60 model Operation: Position the lifting plates below the part to be lifted, adjust the upper support and tension the safety belt. Example model:FM 180 A Load (Kg):1800 Lift height (mm):100 Lifting plate (mm):600x60 Wheels (diameter):150

New strapping tool with battery GT ONE with adjustable operating modes according to the application: automatic, semi-automatic, manual and "soft" for delicate products. The insertion of the strap is quick and easy and, in automatic mode, the operator simply have to press a button to get the tension and vibration welding (heating by friction). Perfectly balanced, it can be used for vertical and horizontal strapping. It is equipped with brushless motor powered by lithium-ion battery of latest-generation and digital display with parameters always visible (tensioning, welding time, battery level). MODEL: GT ONE 10-16 Usable strap:Polypropylene (PP) and polyester (PET) smooth or embossed Type of closure:Vibration sealing (heating by friction) Sealing resistance:75-85% (depends on the quality of the strap) Strap width:10-16 mm Strap thickness: 0,5-1,10 mm Max. tension:2750 N Tensioning speed :13 mt/min

ELECTRICAL EURO-HOLE CUTTING MACHINE FPE2-EURO E The punching FPE2 EURO-E is a silent machine, fast and safe with a sturdy steel frame and powerful electric motor that allows the creation of the euro-hole 32 mm on cardboard, blister, plastic, leather, etc., with thickness up to 3 mm. The operation is very simple, once the product is inserted under the punch, the euro-hole can be made by an electric pedal, especially useful in soft material houses and therefore difficult to detect from the sensor, or via switch (product presence sensor) positioned on the head of the punching machine. The punch is an element subject to wear. Size:400x260x1100h mm Net weight:26,5 kg Package dimensions:420x280x1140h mm Power supply:230V/ 50Hz Power:370 W Fuses:2 x 3.15 A, 100mA Noisiness:less than 70 dB (A)

The fully automatic strapping machine mod. TP 201 with side sealing is particularly suitable for strapping furniture, household appliances, palletised loads and high packages. It can be inserted in lines where the available space or the limited height of the conveyor do not allow the use of a standard strapping machine. The strap is automatically launched, tensioned, welded and cut, speeding up the strapping operations. The strapping machine, suitably modified, can be easily inserted into automatic packaging lines and can also work without an operator. Strap width:mm. 12 Strap thickness:mm. 0,6 - 0,65 Reel internal diameter:mm. 200 Power supply:380 V 3 phase Weight:200 Kg

New model P328/P328S with lithium ion (Li-Ion) 18V battery and reinforced motor for maximum autonomy (up to 600 strapping with a charge), the maximum tensile strength (up to 2400 N) and the reliability of the weld. The ease of insertion of the strap makes it very quick and simple to use. The independent settings of all parameters ensure optimum performance and maximum seal with polypropylene and polyester strapping of any size and quality. Strap width:from 12.0 to 16.0 mm. Strap thickness:0,4- 1,05 mm Max. strap tension:N 250-2600 Tensioning speed:67-124 mm / s Battery :18 V - 4 Ah. Li-Ion Cycles for single charge:300 cycles Weight:4.2 Kg

New battery strapping tool GT ONE ECO with adjustable operating mode according to the application: manual or soft for delicate products. The insertion of the strap is simple and fast and you simply have to press a button to get the tension and the vibration welding (heating by friction). The strapping tool is perfectly balanced, it can be used for vertical and horizontal strappings. It is equipped with a latest generation brushless motor driven by a lithium battery and with a digital display that shows all useful parameters (tension, welding time and battery charge level). Strap width:9-16 mm Strap thickness:0,4-0,85 mm Max. strap tension:1800 N Tensioning speed:14 mt/min Battery :14.4 V dc 3 A/h Li-ion Cycles for single charge:300 cycles Weight:3.7 Kg

Strapping tools for metal strapping 10-13-16/18-19-20 mm manual for flat surface, joint with copper-plated steel seal. Simple and cheap, is used for strapping packages and pallets of any size. This strapping tool requires a flat surface with a minimum length of 200 mm. In general it is not recommended in case of high productions. The sealing depends on the type of material and strap. Strap quality :Steel strap standard / blued R. Max 850 N/mm2 Strap width:mm. 10-13 -16 Tickness strap:mm. 0,5 – 0,6 Joint type:Metallic seal

The most common manual strapping tool for plastic straps. Practical and economical, it is particularly suitable for polypropylene strap with width 12 mm and thickness max mm. 0.8. The closure is done with a metallic tooled seal to increase tightness. Upon request, you can use it in fruit and vegetable sector equipping it with a hook for boxes and containers (optional). MODEL:PL 13 Usable strap:polypropylene Closure type:metal seal PL13 Max width usable strap:mm. 12 Max thickness usable strap:max mm. 0,8 Strapping tool weight:Kg. 2,9

BENCHTOP EUROHOLE CUTTING MACHINE WITH LEVER FPE1-EURO P The FPE1 EURO-P allows the creation of the euro-hole 32 mm on cardboard, blister, plastic, leather etc. It is suitable for small productions. The punch is easily replaceable and is equipped with an extractor device in rubber to facilitate the extraction of the waste. The punch is an element subject to wear. Robust steel structure. Simple use. Dimensions:350x60x250 mm Net weight:6,6 Kg

Pneumatic welder ST POLI WELDING with vibration welding (heating by friction) for PET polyester strap. Compact, handy, easy to use, is suitable for closing every kind of flat packaging. Moreover, thanks to the short base, you can strap round packages with a minimum diameter of mm. 500. The operator simply inserts the two overlapping strips into the strapping tool and press a button to perform the vibration welding. The welder is used in conjunction with a manual tensioner or for the packaging of parcels already pressed. Strap width:10,0 – 19,0 mm. Strap thickness:0.40-1.27 mm. Air pressure:6 bar Air consumpt:14 Lt. / sec Weight:2,3 Kg

The strapping tool ST IMPA 13/16 is usable with both polypropylene strap and polyester strap (green, high resistance) from 12 to 16 mm. Given the high tightness of the seal it is recommended to use a polyester strap. The breaking load depends on the strap of choice. MODEL:ST IMPA 13 Usable strap:Polypropylene and polyester smooth or embossed Closure:special seal knurled P403 Strap width :mm. 12 - 13 Strap thickness:mm. 0.40 - 0.90 Weight without support: Kg. 2,7

Pneumatic strapping tool with seal for flat and round packages. Suitable for strapping round packages and goods with small contact surfaces. Rugged, lightweight, compact, it is suitable for medium/light applications. Available in three versions: 1500N - 3000N - 4500N. Works with glossy or blue strap from mm. 13 to mm. 19 with max. thickness of 0.6 mm. The strap held depends on the type of material to be strapped and the strapping choice. Model:MOD. ST 13-16-19 Strap width:mm. 13 - 16 - 19 Tickness strap:mm. 0,45 - 0,6 Joint type:Seal overlap - length mm. 24 Weight:Kg 4,5

Pneumatic strapping tool with vibration welding (heating by friction) for straps in polypropylene PP and polyester PET width 13-16-19 mm and max. thickness mm. 1,27. Compact, handy, easy to use, is suitable for closing all kinds of flat packaging. Thanks to a very short base and the command of reverse rotation of the roller it may also strap round packing with a minimum diameter of mm. 700. The operator simply inserts the two overlapped strips into the strapping tool, press a button to make the tension, a second button to get the vibration welding, and at the end a third button to pull out the tensioning device effortlessly. Strap width:from 13.0 to 19.0 mm Strap thickness:0,60-1,27 mm Air pressure:6 bar Air consumpt:12 Lt. / sec Weight:5,2 Kg

Pneumatic strapping tool with vibration welding XQD 19 for polyester strap PET, compact, handy and easy to use. The high traction force (2770 N max) and the short supporting base enable its use in every industrial sector for the closure of flat and round packages (with a minimum diameter of mm. 500). The operator simply inserts the two overlapped strips into the strapping tool, press a button to make the tension, a second button to get the vibration welding, and at the end a third button to pull out the tensioning device effortlessly. Strap quality: PET Joint type:Friction weld seal Joint efficiency:75-85% Package type:flat / round Strap width:13- 19 mm Strap thickness:0,6- 1,2 mm Max. tension:2700 N / 270 Kg Tension speed:10 m ./min. Air pressure :6/7 bar / 85 - 100 PSI Weight: 3.8 Kg .

MECHANICAL CUTTING MACHINE FPE2-EURO M - EURO-HOLE The FPE2-EURO M die-cutting machine is a simple and safe machine with a sturdy steel structure that allows the realization of a 32 mm hole in cardboard, blister, plastic, leather, etc. with thickness up to 3 mm. The punch is easily replaceable and is equipped with a rubber extractor device to facilitate the extraction of the scrap. Operation is manual by mechanical pedal. The punch is an element subject to wear and must be replaced periodically. Maximum pierceable paper weight:800 g/m² Punch size:30x60 mm Dimensions:550x410x1150 mm

The operator wrap the product with the strap, put the two ends through the buckle and places into the strapping tool. The first end is locked with the brake while the second is placed under the cutter and inside the tension roller. Increasing the tension of the strap, the buckle keeps the tension. After reaching the desired tension the strap is cut automatically by the tensioning device. MODEL:CTT 20 Max strap width:20 mm Tensioning max.: 50-450 daN Tensioner weight:1,2 kg

Eyeleting machines suitable for applying VELA eyelets on tarpaulins and advertis - f you want to apply VELA type eyelets you must first of all choose which eyelet you want to apply. VELA eyelets range from type 21 (with 7 mm internal hole) to type 150 (with 43 mm internal hole). Once you have chosen the eyelet, you move on to the choice of the punching kit/riveting kit. Eyelets:VELA 21-VELA 31 or Up to VELA 150

Pneumatic strapping tool with vibration welding (heating by friction) for straps in polyester PET width 25-32 mm and max. thickness mm. 1,27. Compact, handy, easy to use, is suitable for closing all kinds of flat packaging. Thanks to a very short base and the command of reverse rotation of the roller it may also strap round packing with a minimum diameter of mm. 700. The operator simply inserts the two overlapped strips into the strapping tool, press a button to make the tension, a second button to get the vibration welding, and at the end a third button to pull out the tensioning device effortlessly. Strap width:25-32 mm Strap thickness:0,8-1,27 mm Air pressure:6/7 bar Air consumpt:12 Lt. / sec Weight:5,7 Kg

The only Pick-up lathe with counter headstock for machining of part from opposite side to first gripping. The extreme precision and repeatability permits operations of turning, milling and, above all, finishing operations by grinding with wheel spindle and disk dresser, hard turning with CBN tools.

CA Abrasive Belts for portable machine tools CA Abrasive Belts for portable machine tools Flexible cloth, Y-weight backing, double resin

Version économique des Disques à Lamelles. Disponibles avec support en fibre de verre. Caractéristiques et avantages: Les disques DLV offrent un haut pouvoir de coupe avec un très bon rapport qualité / prix. Particulièrement indiqués pour applications où la vitesse de coupe et le coût de l’opération sont les éléments principaux. Applications principales: Ebarbage, enlèvement de bourrelets et de projections de soudure, enlèvement de calamine, rouille et oxydations en général. Matières à traiter: Alliages d’acier et acier, aluminium, métaux non-ferreux et leurs alliages, acier à bâtir, fonte, titane, plastique, vernis, laque, stuc.

The Modular Tooling Systems for Transfer Presses consist of arms and pneumatic clamps, these clamps allow the gripping of the sheet metal pieces for their movement to the subsequent work phases. It is also possible to use compensation slides or groups of actuators to realize auxiliary movements on the transfer lines. A simple design, a fast assembly and a rapid development can be achieved by using modular components, such as terminals of various types, extensions, joints and regulation elements. Two types of Brackets can be used for the junctions. The first type consists of friction brackets with open rings that are tightened by appropriate screws. These brackets can move along a tube, hence, the adjustment of the position can be done either along the axis of the tube or angularly. The second type of bracket consists of gear brackets that can fit any requirement thanks to an Exclusive Modular System. With only 8 pieces it is possible to reach unlimited combinations.

I Tooling per Transfer Press sono braccetti e pinze di afferraggio ad azionamento pneumatico, queste pinze consentono la presa dei pezzi di lamiera per il loro spostamento alle fasi successive di lavoro. Si possono anche utilizzare delle slitte o dei gruppi attuatori per realizzare movimenti ausiliari sulle linee transfer. Una progettazione facile, un assemblaggio veloce e una rapida messa a punto si possono raggiungere utilizzando componenti di tipo modulare, quali morsetti di vario tipo, prolunghe, giunti ed elementi di regolazione. Per le giunzioni si possono utilizzare due tipi di morsetti. Il primo tipo consiste nei morsetti ad attrito con anelli aperti che vengono stretti da opportune viti. Questi possono spostarsi lungo un tubo, quindi si può regolare la posizione sia lungo l’asse del tubo sia angolarmente. Il secondo tipo di morsetto consiste nei morsetti dentati che vengono collegati con un contatto dente su cava di appoggio, e permettono una regolazione accurata.

Un reparto specializzato opera per garantire la massima efficienza delle brocce in qualsiasi momento del loro ciclo di vita, offrendo servizi di affilatura, raddrizzatura, rettifica, ripristino e, in alcuni casi, saldatura della broccia. Eseguiamo l’affilatura di tutti i tipi di brocce comprese quelle a dentatura elicoidale e speciale. Questo servizio viene eseguito da personale altamente specializzato con tempi d’attesa ridottissimi e quando necessario, è possibile concordare anche consegne in giornata.

The End-of-Arm Tooling system for Sheet Metal handling named Octopus Grip consists in an octogonal-shaped central arm, attached to the wrist of the Robot Grips, specifically studied to be highly resistant to deflections/vibrations, with holes for the internal passage of air, and two or four patented quick ball coupling systems. The quick ball coupling systems allow the reconfiguration of the Robot Grips by simply changing their end effectors, in this case the tentacles of the Octopus Grip, that can be easily unhooked and placed close to the Robot Grips by a single operator on a vertical warehouse, allowing for savings in time required for changing the tools, and in storage space. The Octopus Grip system is highly flexible, from which it derives its name.

The Minifive is a 5 axes, auto loading, horizontal work centre. Designed for working sintered material and precious metals. It has an inverted configuration in order to prohibit swarf and fumes coming into contact with the mechanical parts.

HSK63F Collet Chuck ER32 for wood, plastic, aluminum working, manufactured in Italy under DIN 69893 and always in stock in Italy, USA, Spain and Czech Republic.

New lightweight and handy device with practical handle with additional controls for rapid gas and electronic ignition opening. The high power and ease of use of this device allows fast retraction of thermo plastic films of any thickness and the packaging of large products. FEATURES - Structure with double insulation for continuous use without overheating and without risk of burns; - Terminal with 360° rotation for use in any position; - 8 meter pipe with quick release; - Safety valve included (in case of breakage block the gas); - Practical carrying case; - Noise level 83db. Example model:RAFALE 65 Max power (kW):37-66 Supply:Propane Gas pression (bar):1.5-3.5 Gas consumption (Kg/h) :2.6–4.8 Ignition:Electronic

The strapping machine with side head is recommended in all sectors in which, with traditional machines, processing residues such as grease, liquids, etc., cause operating problems. The SP92-E is suitable for products with minimum dimensions of 10x50x100 mm; uses strap with a width of 12 mm and a maximum thickness of 0.65 mm. Equipped with worktop with adjustable height and device for automatic shutdown, after 60 sec. of inactivity. Strap width:mm. 12 Strap thickness:mm. 0,6 - 0,65 Air pressure:6/7 bar Air consumpt:12 Lt. / sec Weight:140 Kg

Professional manual tackers Rocama 10/20 with body made of aluminum alloy. Loading dock below. Ideal for fixing labels on packaging and protective materials in wood, for assembly of frames and frames for decoration work, to set wallpaper, baseboards and wood profiles, for exhibitions stands, furniture stores, interiors of homes, caravans, campers and coatings of sofas and furniture. Equipped with power regulator. Available in two models: Rocama 10 for staples series AP with length of 5-8-10 mm, with total width 10 mm, section 0,45x0,90 mm. Rocama 20 for staples series AP with length of 10-12-14-16-20 mm, with total width 10 mm, section 0,45x0,90 mm, brads series FAST M of 20 mm and pin series FAST W of 20 mm, section 1,00x1,25. Example model:Rocama 20 Charger capacity:100 staples Staples lenght:from 10 to 20 mm Staples:AP 110-112-114-116-120 Pins:FAST M 20 with head – FAST W 20 without head